Plexiglass (Acrylic) has a strong impact strength, it is half the weight of glass but 100 times stronger than glass, and 16 times stronger than tempered glass. The light transmittance of acrylic is very good, generally the glass transmittance is 82-89%, the best ultra white glass can only achieve 89%, but the light transmittance of acrylic can go up to 95%. Acrylic has excellent processing performance, it can be machined, thermoformed, and injected into the special formula to achieve seamless splicing on site. But acrylic has a disadvantage, that is low wear resistance than tempered glass.

Acrylic (plexiglass) is widely used, and it can be seen on aviation equipment. However, like many other polymer materials, it is eroded by moisture in the air, which causes certain aging of plexiglass sheets. It has a certain influence on the performance of the board. The test shows that the water c

1, the problem of adhesion to dust If the surface of the acrylic resin is wiped with a dry cloth, there is a tendency to be charged by friction, and it is easy to adhere to the free dust in the air and cause scratches. It is recommended that you use a soft cloth dampened with antistatic agent or met

Compared with glass, acrylic sheet has the same excellent transparency, and is light and tough. The acrylic sheet was popular during World War II and was widely used to make aircraft windshields, canopies and turrets. Acrylic sheets have developed several other commercial applications, such as glass